index

Decisional diagram for liming products

in percent base saturation

Is your buffer pH under 6.9?

Yes

Mg < 10

Mg > 10

Liming required

CEC

Cationic Exchange Capacity

CEC < 16

CEC > 16

K > 3.5

K < 3.5

K < 4

K > 4

result

recommendation

Dolomitic lime

KaLime Calculator

Calcitic lime

Is your K / Mg ratio smaller than 0.30?

CEC = Cationic Exchange Capacity Al = Aluminium Mg = Magnesium K = Potassium P = Phosphorus

Decisional Diagram Legend

Buffer pH 6.5

more information

Buffer pH 6.8

Buffer pH 6.7

Buffer pH 6.6

Dolomitic lime

CEC 13 -17

CEC 9 - 12

Dolomitic lime

CEC < 9

CEC >17

1.6 mt/acre

4.0 mt/ha

For information purposes only. Maximum rate per application may differ. Always consult your agronomist.

Buffer pH 6.5

Buffer pH 6.8

Buffer pH 6.7

Buffer pH 6.6

For information purposes only. Maximum rate per application may differ. Always consult your agronomist.

data sheet

KaLime Calculator

Dolomitic lime

Due to the wide variability between available sources, we suggest validating the recommendation according to your lime’s actual agricultural index. For information purposes only. Maximum rate per application may differ. Always consult your agronomist.

pH tampon 6,7

pH tampon 6,6

Calculations based on the recommendation chart for a liming agent at 75% agricultural index from A&L Canada Laboratories inc. (incorporated at 17 cm)

For information purposes only. Always consult your agronomist.

pH tampon 6,5

Always consider nutrient input when recommending dolmitic lime.

Always consider nutrient input when recommending KaLime.

Calculations based on the recommendation chart for a liming agent at 72.5% agricultural index from A&L Canada Laboratories inc. (incorporated at 17 cm)

Calcitic lime

Always consider nutrient input when recommending calcitic lime.

1.0 mt/acre

2.5 mt/ha

6.4 mt/ha

2.6 mt/acre

2.1 mt/acre

5.1 tm/ha

3.9 mt/ha

2.0 mt/ha

0.8 mt/acre

3.6 mt/acre

8.9 mt/ha

3.1 mt/acre

7.6 mt/ha

1.3 mt/acre

3.1 mt/ha

4.1 mt/ha

1.7 mt/acre

4.1 mt/acre

10.1 mt/ha

11.5 mt/ha

4.7 mt/acre

data sheet

5.1 mt/ha

2.7 mt/acre

6.6 mt/ha

5.2 mt/ha

0.9 mt/acre

2.1 mt/ha

9.2 mt/ha

3.7 mt/acre

7.9 mt/ha

3.2 mt/acre

3.2 mt/ha

11.9 mt/ha

4.8 mt/acre

10.5 mt/ha

4.3 mt/acre

4.3 mt/ha

Dolomitic lime

No liming required

KaLime applications at lower rate on soils with high pH and high Mg saturation have shown profitable crop response. For information purposes only. Maximum rate per application may differ. Always consult your agronomist.

2.2 mt/ha

Value of content of sulphur in KaLime

$ S / kg 21-0-0:

$ S / tm 21-0-0:

Calculator for sulphur value contained in KaLime

sulphur % in KaLime:

$ N / kg 46-0-0:

$ N / kg 21-0-0:

% 21-0-0 24 S:

$ / mt 46-0-0:

$ / mt 21-0-0:

24%

2.3%

Agro-B

guaranteed minimum analysis Total nitrogen (N) = 4%,4% water soluble nitrogen Boron (B) (actual) = 10% Willow bark extract = 0.1% Fulvic acid (derived from leonardite) = 0.1% Chitosan = 0.1% Humic substances (derived from leonardite) = 0.03% Sorbitol = 5% Monoethanolamine = 19% Agro‑B mobility is an agro-liquid concentrated in boron designed to prevent and rectify deficiencies. A good nutrition in boron encourages plant growth, pollination, fructification and assimilation of other nutrients. Agro‑B mobility contains sorbitol, an osmoregulator directly metabolizable and native to the plant, that forms stable and soluble boron complexes to ensure optimal absorption by the leaves, fast translocation facilitating boron mobility and availability to all parts of the plant. Agro‑B mobility is activated by Oligo Prime®, an innovative biostimulant technology that allows for quick absorption and translocation of nutrients and reinforces the plant’s natural defenses against abiotic stresses (drought, low temperature, salinity, etc.). It can be applied on leaves or on the soil based on soil or tissue analyses or as soon as deficiency symptoms appear. For more information on Agro‑B mobility, consult your agronomic adviser. agronomic benefits ■ Better source of boron in foliar application ■ Pollen viability and good pollination ■ Good development and fruit quality ■ Cell wall stability ■ Formation and transport of sugars ■ Assimilation and mobility of calcium ■ Assimilation of nitrogen density 1.340 kg/L Apply at suggested rates.Water volume: at least 200 L/ha (21.5 gallons/acre).

recommendation chart

agro-liquids

4-0-0 + 10% B

Web

compatibility chart

14-4-6 + micros

guaranteed minimum analysis Total nitrogen (N) = 14%, 14% water soluble nitrogen Available phosphoric acid (P2O5) = 4% Soluble potash (K2O) = 6% Magnesium (Mg) = 0.05% Sulphur (S) (actual) = 0.044% Boron (B) (actual) = 0.025% Iron (Fe) (actual) = 0.025% Manganese (Mn) (chelated) (actual) = 0.05% Molybdenum (Mo) (actual) = 0.025% Zinc (Zn) (chelated) (actual) = 0.05% Humic substances (derived from leonardite) = 0.03% Fulvic acid (derived from leonardite) = 0.09% Ethylenediaminetetraacetic acid (E.D.T.A.) (chelating agent) = 1.3% Salvador PLUS is an agro-liquid that contains a biostimulant that allows for quick absorption and translocation of nutrients in plants. Salvador PLUS contains magnesium, sulphur, and micronutrients including boron, iron, manganese, molybdenum, and zinc. Salvador PLUS is chelated with the innovative C-plex chelating agent, a small carbon-based molecule, and with EDTA. Its micronutrients are indispensable cofactors in the production and functioning of enzymes. Salvador PLUS also includes fulvic acids which regulate the level of hormones, stimulate cell division, root and leaf growth, nutrient absorption, improve the anti-stress capacity of plants and thus promote growth and therefore, crop yield. It can be applied on all crops. It must be used based on soil or tissue analyses. For more information on Salvador PLUS, consult your agronomic adviser. agronomic benefits ■ To stimulate growth renewal following a period of stress or plant development at a precise stage (vegetable, fruits, small fruits) ■ Greater effectiveness of nutrients and agrochemical products ■ Improved and protected yield density 1.196 kg/L Apply at suggested rates.Water volume: at least 200 L/ha (21.5 gallons/acre).

Salvador PLUS

agro-liquids

guaranteed minimum analysis Total nitrogen (N) = 6%, 6% water soluble nitrogen Sulphur (S) = 3% Boron (B) (actual) = 0.25% Humic substances (derived from leonardite) = 0.03% Iron (Fe) (actual) = 1.25% Manganese (Mn) (actual) = 2% Zinc (Zn) (actual) = 1.5% Citric acid (derived from leonardite) = 16% SoyAgro is a concentrated agro-liquid specifically formulated for foliar applications in order to stimulate flowering and to prevent and treat boron, iron, manganese, and zinc deficiencies in soybean and bean crops. SoyAgro is also a source of nitrogen and sulphur, two essential elements for crop performance and crop quality. SoyAgro is chelated with the innovative C-plex chelating agent, a small carbon-based molecule that improves absorption and promotes transport of nutritional elements in plants. It must be used based on soil or tissue analyses or as soon as deficiency symptoms appear. For more information on SoyAgro, consult your agronomic adviser. agronomic benefits ■ Provides essential micronutrients for photosynthesis, flower, grain and pollen formation, membrane structure and nitrogen assimilation ■ Source of sulphur for protein and oil synthesis■ Compatible with glyphosate if tank-mixed with Agro-Ammo ■ Secured yield and quality density 1.280 kg/L Apply at suggested rates.Water volume: at least 200 L/ha (21.5 gallons/acre).

6-0-0 + 3% S + micros

SoyAgro

Agro-Ammo

guaranteed minimum analysis Total nitrogen (N) = 8%, 8% water soluble nitrogen Total sulphur (S) = 9% Agro-Ammo is an agro-liquid that contains nitrogen and sulphur. Agro-Ammo stimulates growth and restores plant vigour. It is indicated for every crop and it must be applied based on soil or tissue analyses or as soon as deficiency symptoms appear. So that the plant makes better use of the nitrogen and sulphur, apply Agro-Ammo with a nitrogen solution to provide an adequate N:S ratio of 5:1. For more information on Agro-Ammo, consult your agronomic adviser. agronomic benefits ■ Maximizes the effect of herbicides (reduces the effect of hard water and other metals in the tank mix) ■ Excellent source of sulphur ■ Better nitrogen assimilation ■ Food quality (amino acids, vitamins, oils) ■ Production of self-defense substances ■ Increases the protein rate in wheat ■ Improves wine quality (assimilable nitrogen in grape musts, aromas) density 1.230 kg/L Apply at suggested rates.Water volume: at least 200 L/ha(21.5 gallons/acre) for arable and vegetable crops, 1000 L/ha (100 gallons/acre) for small fruits and fruit trees.

8-0-0 + 9% S

Dilat+

guaranteed minimum analysis Total nitrogen (N) = 18%, 18% water soluble nitrogen Dilat+ is an agro-liquid designed to facilitate the absorption of nutrients through the foliage. With its foliage-friendly formulation, Dilat+ stimulates growth and restores plant vigour. It can be used on every crop based on soil or tissue analyses or as soon as deficiency symptoms appear. For more information on Dilat+, consult your agronomic adviser. agronomic benefits ■ Better source of foliar nitrogen ■ Improves absorption of other foliar products ■ Increases the protein rate in wheat ■ Improves wine quality (assimilable nitrogen in grape musts) density 1.108 kg/L Apply at suggested rates.Water volume: at least 200 L/ha(21.5 gallons/acre) for arable and vegetable crops, 1000 L/ha (100 gallons/acre) for small fruits and fruit trees.

Tissue dilatation

18-0-0

guaranteed minimum analysis Total nitrogen (N) = 2%, 2% water soluble nitrogen Soluble potash (K2O) = 24% Silicate (SiO44-) = 9% Willow bark extract = 0.1% Fulvic acid (derived from leonardite) = 0.12% Chitosan = 0.1% Humic substances (derived from leonardite) = 0.03% Kali-T is a high potassium content agro-liquid designed to prevent and rectify deficiencies in potassium and improve crop quality. Also, Kali-T contains nitrogen which is required for vegetative development and high productivity. Kali-T also contains silicates. Kali-T is activated by Oligo Prime®, an innovative biostimulant technology that allows for quick absorption and translocation of nutrients and reinforces the plant’s natural defenses against abiotic stresses (drought, low temperature, salinity, etc.). It is indicated for every crop and it must be applied based on soil or tissue analyses or as soon as deficiency symptoms appear or if stress risk is high. For more information on Kali-T, consult your agronomic adviser. agronomic benefits ■ Improves form, fructiferous bud formation, uniformity, fruit firmness and water usage ■ Increases fruit quality (flavours, Brix value) ■ Increases resistance against different types of stress (frost and high temperature) ■ Has a positive influence on fruit and flower coloration ■ Formation and transport of sugars ■ Assimilation of nutritional elements density 1.340 kg/L Apply at suggested rates.Water volume: at least 200 L/ha(21.5 gallons/acre) for arable and vegetable crops, 1000 L/ha (100 gallons/acre) for small fruits and fruit trees.

Kali-T

2-0-24 + 9% Silicate

Agro-Mag

6% Mg

guaranteed minimum analysis Magnesium (Mg) (actual) = 6% Willow bark extract = 0.1% Fulvic acid (derived from leonardite) = 0.12% Chitosan = 0.1% Humic substances (derived from leonardite) = 0.03%Acetic acid = 40% Agro-Mag is an agro-liquid designed to prevent and treat deficiencies in magnesium, an essential element for photosynthesis and other plant metabolic processes. Agro-Mag is activated by Oligo Prime®, an innovative biostimulant technology that allows for quick absorption and translocation of nutrients and reinforces the plant’s natural defenses against abiotic stresses (drought, low temperature, salinity, etc.). It is indicated for every crop and it must be applied based on soil or tissue analyses or as soon as deficiency symptoms appear or if stress risk is high. For more information on Agro-Mag, consult your agronomic adviser. agronomic benefits ■ Required for the synthesis of chlorophyll and for photosynthesis ■ More energy in the plant ■ Synthesis and transport of sugars, proteins and lipids ■ Stabilization of cellular membranes ■ Quality of potato tuber ■ Resistance against environmental stresses density 1.194 kg/L Apply at suggested rates.Water volume: at least 200 L/ha(21.5 gallons/acre) for arable and vegetable crops, 1000 L/ha (100 gallons/acre) for small fruits and fruit trees.

Póma

6% Ca

guaranteed minimum analysis Calcium (Ca) = 6% Willow bark extract = 0.1% Fulvic acid (derived from leonardite) = 0.12% Chitosan = 0.1% Humic substances (derived from leonardite) = 0.03% Póma is an agro-liquid designed to prevent and treat calcium deficiencies by foliar or radicular pathway. Calcium is essential to maintain the structural integrity of cells. Póma is activated by Oligo Prime®, an innovative biostimulant technology that allows for quick absorption and translocation of nutrients and reinforces the plant’s natural defenses against abiotic stresses (drought, low temperature, salinity, etc.). Calcium applications prevent physiological disorders linked to calcium deficiencies: bitter pit in apples, tip burn (marginal necrosis) in lettuce and cabbage, blossom-end rot (apical dehydration) in tomatoes, peppers, and cucumbers, blackheart in celery, cracking in citrus fruits, prunes and cherries, coulure (shatter) in grapes and olives, etc. It must be used based on soil or tissue analyses or as soon as deficiency symptoms appear. For more information on Póma, consult your agronomic adviser. Póma can also be sprayed by airplane. agronomic benefits ■ Chlorine-and nitrate-free calcium acetate ■ Tensioactive agent (droplet distribution) ■ Damping agent (evaporation restriction) ■ Adhesive agent (anti-washout) ■ Penetrating agent (passage of mineral elements through the leaf wall) density 1.130 kg/L Apply at suggested rates.Water volume: at least 200 L/ha(21.5 gallons/acre) for arable and vegetable crops, 1000 L/ha (100 gallons/acre) for small fruits and fruit trees.

8–0–0 + 3.5% S + 0.5% Fe + 6% Mn

Agro-Mn

guaranteed minimum analysis Total nitrogen (N) = 8%, 8% water soluble nitrogen Sulphur (S) = 3.5% Iron (Fe) (actual) = 0.5% Manganese (Mn) (actual) = 6% Willow bark extract = 0.1% Fulvic acid (derived from leonardite) = 0.12% Chitosan = 0.1% Humic substances (derived from leonardite) = 0.03% Citric acid = 2.1% Agro-Mn is an agro-liquid designed for soil and foliar applications in order to prevent and treat manganese deficiencies. Agro-Mn is reinforced with iron, nitrogen and sulphur in order to maximize photosynthesis, biomass production and yields. Agro-Mn is activated by Oligo Prime®, an innovative biostimulant technology that allows for quick absorption and translocation of nutrients and reinforces the plant’s natural defenses against abiotic stresses (drought, low temperature, salinity, etc.). Agro‑Mn can be applied to all crops based on soil or tissue analyses or as soon as deficiency symptoms appear. For more information on Agro‑Mn, consult your agronomic adviser. agronomic benefits ■ Manganese and iron chelated for greater absorption capacitycapacity ■ High photosynthetic activity ■ Assimilation of nitrogen ■ Better potato quality and preservation ■ Lateral root formation ■ Resistance against diseases ■ Lodging resistance in cereal crops <="" div=""> density 1.300 kg/L <="" div=""> <="" div="">Apply at suggested rates.Water volume: at least 200 L/ha (21.5 gallons/acre).

Agro-Phos

0-29-5 + 4% Mg

guaranteed minimum analysis Available phosphoric acid (P2O5) = 29% Potash (K2O) (soluble) = 5% Magnesium (Mg) (actual) = 4% Willow bark extract = 0.1% Fulvic acid (derived from leonardite) = 0.12% Chitosan = 0.1% Humic substances (derived from leonardite) = 0.03% Agro‑Phos is an agro-liquid highly concentrated in phosphorus, enriched with potassium and magnesium that are soluble and assimilable by the plant through foliar pathway as well as by the roots. It helps to prevent and rectify phosphorus, potassium and magnesium deficiencies. Thanks to its very high concentration in phosphorus, Agro‑Phos strenghtens root establishment of the crop. The phosphorus acts in synergy with the potassium and the magnesium to activate photosynthesis, protein and sugar synthesis and hydric nourishment. Agro‑Phos is activated by Oligo Prime®, an innovative biostimulant technology that allows for quick absorption and translocation of nutrients and reinforces the plant’s natural defenses against abiotic stresses (drought, low temperature, salinity, etc.). It must be applied based on soil or tissue analyses or as soon as deficiency symptoms appear. For more information on Agro‑Phos, consult your agronomic adviser. agronomic benefits ■ Enhances the transport of energy in the plant ■ Increases tuber formation and tuber caliber uniformity (potato) ■ Good root establishment and earliness ■ Resistance against stresses ■ Increases nutritional value of other elements ■ Maximized yield ■ Better quality of harvested products <="" div="">density 1.467 kg/L<="" div=""> <="" div="">Apply at suggested rates.Water volume: at least 200 L/ha(21.5 gallons/acre) for arable and vegetable crops, 1000 L/ha (100 gallons/acre) for small fruits and fruit trees.

2.5% S + 5% Cu

guaranteed minimum analysis Sulphur (S) = 2.5% Copper (Cu) (actual) = 5% Willow bark extract = 0.1% Fulvic acid (derived from leonardite) = 0.12% Chitosan = 0.1% Humic substances (derived from leonardite) = 0.03% Agro‑Cu is an agro-liquid designed to prevent and treat copper deficiencies. Copper is indispensable to the functioning of enzymes responsible for the plant’s defense mechanisms against abiotic stresses. Copper is also essential for nitrogen assimilation and lignin synthesis in plant cell walls. Agro‑Cu is activated by Oligo Prime®, an innovative biostimulant technology that allows for quick absorption and translocation of nutrients and reinforces the plant’s natural defenses against abiotic stresses (drought, low temperature, salinity, etc.). Agro‑Cu can be applied to all crops based on soil or tissue analyses or as soon as deficiency symptoms appear. For more information on Agro‑Cu, consult your agronomic adviser. agronomic benefits ■ Increases the value of nitrogen-based fertilizers ■ Increases resistance against bacterial and fungal diseases ■ Reduces the lodging risk in cereal crops ■ Corrects frequent deficiencies in black soil <="" div="">density 1.178 kg/L<="" div=""> <="" div="">Apply at suggested rates.

Agro-Cu

Agro-Fe

guaranteed minimum analysis Total nitrogen (N) = 6%, 6% water soluble nitrogen Sulphur (S) = 2.5% Iron (Fe) (actual) = 5% Citric acid = 8.6% Willow bark extract = 0.1% Fulvic acid (derived from leonardite) = 0.12% Chitosan = 0.1% Humic substances (derived from leonardite) = 0.03% Agro‑Fe is an agro-liquid designed to prevent and treat iron deficiencies. Iron is essential for breathing, chlorophyll formation, photosynthesis and nitrogen assimilation (protein formation). Agro‑Fe is activated by Oligo Prime®, an innovative biostimulant technology that allows for quick absorption and translocation of nutrients and reinforces the plant’s natural defenses against abiotic stresses (drought, low temperature, salinity, etc.). Agro‑Fe can be applied to all crops based on soil or tissue analyses or as soon as deficiency symptoms appear. For more information on Agro‑Fe, consult your agronomic adviser. agronomic benefits ■ Effectiveness and fast-action ■ Fast “regreening” effect ■ Better use of nitrogen ■ Secured yield ■ Superior quality crops <="" div="">density 1.158 kg/L<="" div=""> <="" div="">Apply at suggested rates.

6–0–0 + 2.5% S + 5% Fe

guaranteed minimum analysis Total nitrogen (N) = 4%, 4% water soluble nitrogen Molybdenum (Mo) (actual) = 4% Willow bark extract = 0.1% Fulvic acid (derived from leonardite) = 0.12% Chitosan = 0.1% Humic substances (derived from leonardite) = 0.03% Agro-Moly is an agro-liquid designed to prevent and treat molybdenum deficiencies. Molybdenum is a component of enzymes that convert nitrates into ammonia and then into amino acids. It is required by nitrogen-fixing bacteria in legumes. Molybdenum also intervenes in phosphorus and iron assimilation. Agro-Moly is activated by Oligo Prime®, an innovative biostimulant technology that allows for quick absorption and translocation of nutrients and reinforces the plant’s natural defenses against abiotic stresses (drought, low temperature, salinity, etc.). It must be used based on soil or tissue analyses or as soon as deficiency symptoms appear. For more information on Agro-Moly, consult your agronomic adviser. agronomic benefits ■ Improves the plant’s use of nitrogen ■ Helps in the formation of nodules in legumes ■ Improves the use of phosphorus and iron ■ Secures yields <="" div="">density 1.105 kg/L<="" div=""> <="" div="">Apply at suggested rates.Water volume: at least 200 L/ha (21.5 gallons/acre).

4-0-0 + 4% Mo

recommendation chart

Agro-Moly

guaranteed minimum analysis Total nitrogen (N) = 5%, 5% water soluble nitrogen Zinc (Zn) (actual) = 9% Willow bark extract = 0.1% Fulvic acid (derived from leonardite) = 0.12% Chitosan = 0.1% Humic substances (derived from leonardite) = 0.03%Citric acid (chelating agent) = 26.5% Agro-Zn is an agro-liquid designed to prevent and treat zinc deficiencies. Zinc is a key element in the synthesis of hormones (auxins), the functioning of enzymes, and the synthesis of proteins. Agro-Zn is activated by Oligo Prime®, an innovative biostimulant technology that allows for quick absorption and translocation of nutrients and reinforces the plant’s natural defenses against abiotic stresses (drought, low temperature, salinity, etc.). It must be applied based on soil or tissue analyses or as soon as deficiency symptoms appear. For more information on Agro-Zn, consult your agronomic adviser. agronomic benefits ■ Growth and maturity stimulation ■ Quick correction of deficiencies ■ Better bud burst in fruit trees ■ Assimilation of calcium and other elements ■ Resistance against stresses ■ Sustained yield and quality <="" div="">density 1.270 kg/L Apply at suggested rates. Water volume: at least 200 L/ha (21.5 gallons/acre).

5–0–0 + 9% Zn

Agro-Zn

Agro-liquids

The values and recommendations suggested here concern Ontario

Calculators for Nutriliming Agents

Recommendations for Liming

Nutriliming Data Sheets

$/MT

Cost price of 0-0-60 (delivered & spread): 750 $

$/MT

Magnesium (Mg) value

Cost price of 0-0-60 (delivered & spread) with KaLime:

Liming value delivered and spread (calcium lime reference):

46-0-0

Micronutrients value

$/%

$/MT

/MT

Take sulphur (S) into account

Take magnesium (Mg) into account

Agro-100®Nutriliming agents actual values

(S)

Take micronutrients into account

(Mg)

21-0-0 24 S

0-0-22 11 Mg 22 S

The values proposed by default are those of KaLime

Sulphur (S) value

Cost of Nutriliming agent delivered and spread:

guaranteed minimum analysis Soluble potash (K2O) = 24% Boron (B) (actual) = 1% Willow bark extract = 0.1% Fulvic acid (derived from leonardite) = 0.12% Chitosan = 0.1% Humic substances (derived from leonardite) = 0.03% Special K is an agro-liquid designed to prevent and treat potassium deficiencies. It is manufactured using potassium carbonate because it is a chlorine-free source of potassium thus making it suitable for application to plants and well adapted for foliar application. Special K is activated by Oligo Prime®, an innovative biostimulant technology that allows for quick absorption and translocation of nutrients and reinforces the plant’s natural defenses against abiotic stresses (drought, low temperature, salinity, etc.). It must be applied based on soil or tissue analyses or as soon as deficiency symptoms appear. For more information on Special K, consult your agronomic adviser. agronomic benefits ■ Improves form, fructiferous bud formation, uniformity, fruit firmness and water usage ■ Increases fruit quality (flavours, Brix value) ■ Prevents diseases and physiological disorders ■ Increases resistance against different types of stress (frost and high temperature) ■ Has a positive influence on fruit and flower coloration ■ Formation and transport of sugars ■ Greater solubility on the foliage <="" div=""> density 1.380 kg/L <="" div=""> <="" div="">Apply at suggested rates. Water volume: at least 200 L/ha (21.5 gallons/acre) for cash crops and at least 300 L/ha (32 gallons/acre) for horticultural crops. <="" div=""> <="" div="">

0–0–24 + 1% B

Special K

12% Ca + 0.45% Mg

guaranteed minimum analysis Calcium (Ca) (actual) = 12% Magnesium (Mg) = 0.45% Humic substances (derived from leonardite) = 0.03% Calstik C12 is an agro-liquid with 12% calcium designed to prevent calcium deficiencies and supplement the soil’s fertility level. Calstik C12 is chelated with the innovative C-plex chelating agent, a small carbon-based molecule that improves absorption and promotes transport of nutritional elements in plants. This natural product does not burn leaf tissues. Its higher calcium concentration makes it an economical source. It can be used on every crop based on soil or tissue analyses or as soon as deficiency symptoms appear. For more information on Calstik C12, consult your agronomic adviser. agronomic benefits ■ Reduction of many physiological disorders ■ Better fruit and vegetable quality ■ Better fruit and vegetable preservation ■ Strengthens cell walls and decreases crop injuries caused by machinery <="" div=""> density 1.388 kg/L <="" div=""> <="" div="">Apply at suggested rates. Water volume: at least 200 L/ha (21.5 gallons/acre) for cash crops and at least 300 L/ha (32 gallons/acre) for horticultural crops.<="" div=""> <="" div="">

Calstik C12

agro-liquids

CropBooster

15–3–6 + 2% S + micros

guaranteed minimum analysis Total nitrogen (N) = 15%, 15% water soluble nitrogen Available phosphoric acid (P2O5) = 3% Soluble potash (K2O) = 6% Sulphur (S) (actual) = 2% Boron (B) (actual) = 0.02% Manganese (Mn) (chelated) (actual) = 0.05% Molybdenum (Mo) (actual) = 0.05% Zinc (Zn) (chelated) (actual) = 0.05% Willow bark extract = 0.1% Fulvic acid (derived from leonardite) = 0.12% Chitosan = 0.1%E.D.T.A. (chelating agent) = 0.5% Monoethanolamine = 0.287% CropBooster® is an agro-liquid that contains a biostimulant allowing for quick absorption, translocation of nutrients and reinforcement of the plants’ natural defenses against abiotic stresses. Nutrients that are incorporated in the solution improve the plants’ vegetative growth. CropBooster® activates the production of 71 enzymes and proteins essential for decreasing the oxidative effects of reactive oxygen species (ROS) on stressed crops and also stimulates auxin production. Its micronutrients—chelated with C‑plex and with EDTA—are indispensable cofactors in the production and functioning of enzymes. It must be applied based on soil or tissue analyses, as soon as deficiency symptoms appear or to prevent abiotic stresses. For more information on CropBooster®, consult your agronomic adviser. agronomic benefits ■ Improvement of vegetative development early in the season ■ Reduction of abiotic stresses (anti-parasitic agents, drought, heavy rainfalls, insects, hail, summer frost) ■ Stimulation of the plant’s natural defenses density 1.200 kg/L Apply at suggested rates. Water volume: at least 200 L/ha (21.5 gallons/acre).

RR SoyBooster

guaranteed minimum analysis Total nitrogen (N) = 6%, 6% water soluble nitrogen Available phosphoric acid (P2O5) = 18% Soluble potash (K2O) = 6% Sulphur (S) (actual) = 5% Boron (B) (actual) = 0.02% Cobalt (Co) = 0.01% Manganese (Mn) (chelated) (actual) = 0.05% Molybdenum (Mo) (actual) = 0.1% Zinc (Zn) (chelated) (actual) = 0.05% Willow bark extract = 0.1% Fulvic acid (derived from leonardite) = 0.12% Chitosan = 0.1% Humic substances (derived from leonardite) = 0.03% Ethylenediaminetetraacetic acid (E.D.T.A.) (chelating agent) = 0.5% Monoethanolamine = 0.234% RR SoyBooster® is an agro-liquid that has been developed and adapted for application on soybeans. The nutrients that are incorporated in the solution improve the flowering and growth of plants during the reproductive stages. RR SoyBooster® is activated by Oligo Prime®, an innovative biostimulant technology that allows for quick absorption and translocation of nutrients and reinforces the plant’s natural defenses against abiotic stresses (drought, low temperature, salinity, etc.). It also stimulates auxin production. Its micronutrients—chelated with C-plex and EDTA—are indispensable cofactors in the production and functioning of enzymes and the addition of cobalt and molybdenum improves nodulation and nitrogen fixation. It must be applied based on soil or tissue analyses, as soon as deficiency symptoms appear or to prevent abiotic stresses. For more information on RR SoyBooster®, consult your agronomic adviser. agronomic benefits ■ Improvement of vegetative development early in the season ■ Reduction of abiotic stresses and stimulation of the plant’s natural defenses ■ Enhancement of nodulation and nitrogen fixation density 1.330 kg/L Apply at suggested rates. Water volume: at least 200 L/ha (21.5 gallons/acre).

6–18–6 + 5% S + micros

guaranteed minimum analysis Available phosphoric acid (P2O5) = 7% Sulphur (S) = 4% Manganese (Mn) (chelated) (actual) = 7% Willow bark extract = 0.1% Fulvic acid (derived from leonardite) = 0.12% Chitosan = 0.1% Humic substances (derived from leonardite) = 0.03% MnBooster™ is an agro-liquid with 7% of manganese designed as a preventive or corrective treatment against manganese deficiencies that commonly occur in a wide range of crops. Manganese is vital to chlorophyll formation and serves as a cofactor in the production and functioning of enzymes. It also contains phosphorus and sulphur to optimize plant growth. MnBooster™ is activated by Oligo Prime®, an innovative biostimulant technology that allows for quick absorption and translocation of nutrients and reinforces the plant’s natural defenses against abiotic stresses (drought, low temperature, salinity, etc.). It can be applied on all crops. It must be used based on soil or tissue analyses or as soon as deficiency symptoms appear. For more information on MnBooster™, consult your agronomic adviser. agronomic benefits ■ Improvement of vegetative development early in the season ■ Correction and prevention of manganese deficiencies in a wide range of crops ■ Stimulation of the plant’s natural defenses ■ Improvement of crop yield potential density 1.290 kg/L Apply at suggested rates. Water volume: at least 200 L/ha (21.5 gallons/acre).

0–7–0 + 4% S + 7% Mn

MnBooster

10-30-3 + micros

Agro-Start

guaranteed minimum analysis Total nitrogen (N) = 10%, 10% water soluble nitrogen Available phosphoric acid (P2O5) = 30% Soluble potash (K2O) = 3% Boron (B) (actual) = 0.01% Zinc (Zn) (chelated) (actual) = 0.5% Humic substances (derived from leonardite) = 0.12% Indole-3-butyric acid (IBA) = 0.003%Citric acid = 1.47% Agro-Start is an agro-liquid rich in phosphorus designed for soil application in order to encourage root growth and help the plant resist to stress better. The auxin contained in the Agro-Start formulation stimulates root establishment. Agro-Start supplies phosphorus, potash, boron and zinc in forms that are assimilable for the plant to ensure robust root establishment. Potassium and zinc are chelated with the innovative C-plex chelating agent, a small carbon-based molecule that improves absorption and promotes transport of nutritional elements in plants. Agro-Start provides nitrogen that is quickly made available to support foliar growth. With Agro-Start, the plant establishes itself quicker, therefore favouring a more vigorous foliar development. For more information on Agro-Start, consult your agronomic adviser. agronomic benefits ■ Enhances the development of floral organs, roots and tuberous organs ■ Reduction of abiotic stresses ■ Stimulation of the plant’s natural defenses <="" div="">density 1.412 kg/L<="" div=""> <="" div="">Apply at suggested rates.Water volume: at least 200 L/ha (21.5 gallons/acre).

guaranteed minimum analysis Total nitrogen (N) = 4%, 4% water soluble nitrogen Boron (B) (actual) = 10% Monoethanolamine = 19.13% Nitro-B is an agro-liquid for the soil that contains 10% of boron. It is specifically formulated to provide boron at side-dressing. Incorporated into an urea and ammonium nitrate (UAN) solution, to liquid starters and other agricultural inputs, it supplies boron in the same passage to be assimilated by the plant through the root system. Adding Nitro-B allows the addition of boron to the UAN solution. It must be applied based on soil or tissue analyses or as soon as deficiency symptoms appear. Nitro-B offers the advantage of applying boron at the right place, at the right rate and at the right time to ensure optimal crop performance. For more information on Nitro-B, consult your agronomic adviser. agronomic benefits ■ Formulated to provide boron at side-dressing ■ Source of readily available boron during corn pollination ■ Helps in the transfer of sugars and nutrients <="" div="">density 1.300 kg/L<="" div=""> <="" div="">Apply at suggested rates.

4–0–0 + 10% B

Nitro-B

guaranteed minimum analysis Total nitrogen (N) = 6%, 6% water soluble nitrogen Available phosphoric acid (P2O5) = 2% Humic substances (derived from leonardite) = 29% Nitro-C with 29% C is a carbon-rich agro-liquid designed for impregnation or incorporation in granular and liquid fertilizers. This product promotes nutrient absorption through the roots and foliage. Extracted from an exclusive blend of humic and fulvic acids, the carbon in Nitro-C favours optimal use of available nutrients to fully stimulate growth, flowering and plant maturation throughout the season. Nitro-C is a complement to granular or liquid fertilizers applied in the furrow at planting. Therefore, it facilitates the absorption of nutrients provided by these starter fertilizers. To achieve maximum effect, apply Nitro-C directly on granular fertilizers or incorporate it into liquid fertilizers. For more information on Nitro-C, consult your agronomic adviser. agronomic benefits ■ Facilitates the absorption of nutrients supplied by starter fertilizers ■ Promotes transport of nutritional elements in the plant ■ Encourages growth, flowering and plant maturation ■ Effective source of carbon <="" div=""> <="" div="">density 1.080 kg/L<="" div=""> Apply at suggested rates.Water volume: at least 200 L/ha (21.5 gallons/acre).

6–2–0 + 29% C

Nitro-C

Why use Oligo® Prime?

Oligo® Prime is an innovative biostimulant technology designed to enhance the plant’s natural defenses against abiotic stresses and improve nutrient use efficiency to achieve and reach its full yield potential. Oligo® Prime consists of four technologies that interact together to stimulate the plant’s natural defense mechanisms. This state of hypervigilance increases yield. The biostimulant technology works by activating the production of 71 enzymes and proteins that are essential for decreasing the damage caused by reactive oxygen species (ROS) on stressed crops. Oligo® Prime stimulates auxin production and root development. It also contains a package of micronutrients—chelated with C‑plex—that are indispensable cofactors in the production and functioning of enzymes. Metabolic signals Metabolic signals are biostimulants that reduce the impact of abiotic stresses with phenolic acids and organic acids. C-plex C-plex is an innovative carbon-based chelating agent. This smaller molecule increases the mobility of nutrients in the plant. Its ability to bind either with cations or anions facilitates their transport through the leaf’s cuticle. Fulvic acid Fulvic acid is a biostimulant that acts on absorption and transport of nutrients. Chitosan Chitosan is a biopolymer derived from chitin. It launches plant defense mechanisms against abiotic stresses. Treated plants place themselves in a state of hypervigilance which increases yield.

Calstik C12

Agro-B mobility

RRSoyBooster

Agro-liquids